安全检测:瑞星:安全 诺顿:安全 卡巴:安全
课程设计-“杠杆”零件加工工艺规程及钻削M10mm毛坯孔工序专用夹具设计,共13页,4582字,附设计图纸,工艺过程卡片,工序卡片
摘 要
这次设计的是CA6140车床(831009)杠杆,包括零件图、毛坯图、装配图各一张,机械加工工艺过程卡片和与工序卡片各一张。首先我们要熟悉零件和了解其作用它们。它们位于厢体内部,传递扭距,帮助忙乱变速机床工作台的运动方向。然后,根据零件的性质和零件图上各端面的粗糙度确定毛坯的尺寸和械加工余量。最后拟定拨差的工艺路线图,制定该工件的夹紧方案,
画出夹具装配图。
就我个人而言,我希望能通过这次课程设计,了解并认识一般机器零件的生产工艺过程,巩固和加深已学过的技术基础课和专业课的知识,理论联系实际,从中锻炼自己分析问题、解决问题的能力,为今后的工作打下一个良好的基础,并且为后续课程的学习打好基础。
Abstract
This time I design the lathes of the shift forks CA6140(831009), including that the part pursuing , the blank pursues , assembling pursues , the machine work procedure card the working procedure card every sheet .We should know the part very well and know its effect first , it is worked in the organization which is used for change the speed in a lathe, and the mainly role of the part is alter the speed. Then, we design the dimension of the blank and instrument process a margin of the part according to part character and the harshness of each face .Finally, I design the handicrafts route picture of the shift forks, work out the fastening motion scheme being workpiece's turn , draw up clamp assembling picture.
As far as my individual be concerned, I want to knowing the general productive technology of machine part , consolidating and deepening the knowledge of basic course and specialized course what I have already learned , integrates theory with practice, and improve the ability to solve problems, what’s more , striking the basis for the future work and the following course’s studying .
目 录
1.杠杆的工艺分析及生产类型的确定 5
1.1杠杆的用途: 5
1.2.杠杆的技术要求- 5
1.3.审核杠杆的工艺性 5
1.4.确定杠杆的生产类型 6
2.确定毛坯、绘制毛坯简图 6
2.1.选择毛坯 6
2.2.确定毛坯的尺寸公差和加工余量 6
2.2.1公差等级 6
2.2.2铸件的材质系数 6
3.拟定杠杆工艺路线 7
3.1.定位基准的选择 7
3.1.1 粗基准的选择 7
3.1.2 精基准的选择 7
3.2.表面加工方法的确定 7
3.3加工阶段的划分 8
3.4工序的集中与分散 8
3.5,工序顺序的安排 8
3.5.1:机械加工工序 8
3.6:确定工艺路线 8
3.7切削用量,时间定额的计算 9
3.7.1切削用量的计算 10
3.7.2时间定额的计算 10
4、夹具设计 11
4.1问题的提出 11
4.2夹具设计 11
4.2.1、定位基准选择 11
4.2.2、钻套高度和排悄间隙 11
1.杠杆的工艺分析及生产类型的确定
1.1杠杆的用途:
它的主要的作用是用来支承、固定的。要求零件的配合是符合要求
1.4.确定杠杆的生产类型
依设计题目知:N=4000件/年,杠杆重量为1.0kg,杠杆属轻型零件。该杠杆的生产类型为大批生产。