安全检测:瑞星:安全 诺顿:安全 卡巴:安全
毕业设计-螺旋压力机设计,共40页,15638字,附设计图纸、外文翻译、答辩PPT
摘 要
螺旋压力机具有,结构简单、调整和维护简便、能保证工件精度的稳定性。广泛应用于金属模锻、精压等加工。
本论文主要叙述了电动螺旋压力机的发展概况及工作原理,并与其他类型的螺旋压力机进行对比,表现出了电动螺旋压力机的结构简单、操作方便,精度高,工艺性好,可靠性好等优点。文中通过对本次设计采用的开关磁阻电动机工作原理的介绍和性能的分析,突出变现了本次设计中电动螺旋压力机的优越性。经过对螺旋传动装置的选材和各项性能校核,确定了传动装置的基本尺寸,设计出符合车间用于压力校正和压力装拆的电动螺旋压力机,其操作简便,结构简单,符合本次设计要求。
关键词:开关磁阻电动机,传动装置,压力校正和压力装拆。
ABSTRACT
Screw press with large capacity, simple structure, easy adjustment and maintenance, can guarantee the stability of the workpiece precision. Widely used in metal forging, sizing processing, etc.
This paper mainly introduces the general situation of the development of the electric screw press and working principle, and compared with other types of screw press, showed the electric screw press the advantages of simple structure, convenient operation. The electric screw press has a simple structure, convenient operation; High precision, good in usability, good reliability, etc. In this paper, through to this design adopts the working principle of the switched reluctance motor is introduced and the performance analysis, highlight to liquidate the superiority of the design of the electric screw press. After the material and the performance of the helical gear, and the final choice of prime mover types, design conforms to the workshop for pressure correction and demolition of the electric screw press, its easy operation, simple structure, meet the design requirements.
KEYWORDS:Switch reluctance motor, transmission device, pressure calibration and installation
目录
第一章 绪论 4
1.1 螺旋压力机概述 4
1.2 螺旋压机的发展史 4
1.3 螺旋压力机的特点 4
1.4 螺旋压力机发展趋向 5
1.5 本设计的主要内容和步骤 6
第二章 螺旋压力机驱动类型选择 7
2.1 摩擦螺旋压力机 7
2.2 液压螺旋压力机 8
2.3 离合器式螺旋压力机 8
2.4 电动螺旋压力机 9
2.4.1 电动螺旋压力机的分类 9
2.4.2 电动螺旋压力机的特点 10
2.5 性能分析 10
第三章 螺旋传动主要参数计算 12
3.1 螺旋传动的应用和类型 12
3.2 螺旋传动的设计 13
3.3 设计计算步骤: 15
3.3.1 螺旋机构耐磨性的计算 15
3.3.2 螺母螺纹牙的计算 18
3.3.3 螺杆强度的校核 21
3.3.4 螺杆稳定性的校核 22
3.3.5 自锁性的校核 24
第四章 开关磁阻电动机 25
4.1 开关磁阻电动机简述 25
4.2 开关磁阻电动机机结构特点 25
4.3 电动机功率计算 26
4.4 开关磁阻电动机发展前景 27
第五章 电动螺旋压力机结构设计 28
5.1 电动螺旋压力机工作原理 28
5.2 螺杆的设计 29
5.3 螺母的设计 30
5.4 机身设计 30
第六章 全文总结 32
参考文献 33
致 谢 34
毕业设计小结 35
本设计的主要内容和步骤
本设计介绍了螺旋压力机的发展状况,经过与摩擦螺旋压力机、离合器式螺旋压力机、液压式螺旋压力机进行对比,突出体现了电动螺旋压力机独特的性能优势和结构特点。主要思路如下:
1.通过对几种典型的螺旋压力机的对比,确定螺旋压力机的驱动类型为电动机驱动;
2.电动螺旋压力机螺旋传动类型的选择及传动装置的计算;
3.本设计所采用的开关磁阻电动机的概述及功率选择;
4.电动螺旋压力机的结构设计。
主要技术指标
设计一个龙门式小型螺旋压力机,主要用于机修车间压力校正、压力装拆等。主要技术要求如下:
1)最大输出压力为30kg。
2)压力机压头行程为350mm,运动速度为0.3m/min。
3)压力机内可放置物体高度为400mm,直径400mm。
4)压力机工作间歇工作100000h。