安全检测:瑞星:安全 诺顿:安全 卡巴:安全
毕业设计-燃煤锅炉高效除尘脱硫示范工程工艺设计,53页,25375字
摘要:本设计以15T/h燃煤锅炉为例,在掌握燃煤烟气的组成、污染物源强与特征等基础上,采用了“袋式除尘——湿法脱硫”的高效组合工艺技术,使锅炉燃煤烟气排放远优于国家环保标准规定要求,即烟尘≤50mg/Nm3、SO2≤400mg/Nm3,并明确了相关技术经济指标,为有效保护大气环境与减排SO2约束性指标提供了工程示范。该组合工艺运行稳定、高效、可靠、适应性强。
关键词:燃煤锅炉;袋式除尘;湿法脱硫;工程示范
Efficient Dust-Removing and Desulfurization Arts and Crafts Design for Coalfired Boiler
Abstract: This project takes a coal burning boiler (15T/h) for example, which adopts an efficient combined technology called “Bag Filter - wet desulfurization” on the basis of a clear understanding of the composition of coal gases, source strength and characteristic of pollutants. With the help of this technology, the emission concentration of coal gases is far below the national standard which means smoke dust≤50mg/Nm3、SO2≤400mg/Nm3, and the relevant technical-economic indexes are all clearly. This provides a demonstration project for some targets such as efficiently protecting the air environment and carbon emission reduction. This combined technology is steady, efficient and reliable.
Key word:Coal burning boiler; Bag Filter; Wet desulfurization; Demonstration project
目 录
1 绪论 6
1.1 课题背景和意义 6
1.2 主要污染物的危害 7
1.2.1 烟尘 7
1.2.2 SO2 7
2 设计依据、标准、原则和范围 9
2.1 设计依据 9
2.2 设计标准 9
2.3 设计原则 10
2.4 设计范围 10
3 工艺选比与设计 11
3.1 设计思路 11
3.1.1 除尘设备选择 11
3.1.2 脱硫工艺选择 11
3.1.3 脱硫设备选择 13
3.2 工艺流程 14
3.2.1 双碱法的脱硫原理 14
3.2.2 喷淋洗涤塔原理 14
3.2.3 工艺流程图 15
3.2.4 工艺流程说明 15
3.3 相关问题说明 16
3.3.1 结垢问题说明 16
3.3.2 烟气带水问题 17
4 工艺参数设计 18
4.1 烟气来源与设计参数 18
4.1.1 烟气来源 18
4.1.2 设计取用烟气参数 18
4.2 袋式除尘器的选型设计和计算 22
4.2.1 袋式除尘器的选型 22
4.2.2 袋式除尘器的设计计算 23
4.2.3 袋式除尘器的保温和防腐 29
4.2.4 袋式除尘器的安装、调试、运行、维护和检修 30
4.3 喷雾旋流脱硫设备的设计和计算 31
4.3.1 塔体计算 32
4.3.2 循环水量计算 33
4.4 烟囱的设计 35
4.5 除尘管道压损的计算及引风机的配置 36
4.6 其他配套设施 40
4.7 结果预测 43
5 物料消耗 44
5.1 脱硫剂 44
5.2 循环水的补充量 45
5.3 消耗的氢氧化钠量 45
6 运行成本 47
6.1 电耗 47
6.1.1 负荷等级 47
6.1.2 电气负荷 47
6.2 物料 47
6.2.1 脱硫剂费 47
6.2.2 循环水 48
6.3 易损件 48
6.4 设备折旧 48
6.5 管理维护费 49
6.6 年运行费用 49
7 工程投资概算 50
8 结论与建议 51
8.1 结论 51
8.2 建议 51
附 图 52
致 谢 52
参 考 文 献 53